Page 30

EETE MAY 2015

PIC® MCUs with Core Independent Peripherals Core Independent Peripherals PIC microcontrollers with Core Independent Peripherals take 8-bit MCU performance to a new level. With a number of on-board modules designed to increase capability in any control system, these MCUs represent the best value in embedded design. The following Core Independent Peripherals are designed to handle their tasks with no code or supervision from the CPU to maintain operation. As a result, they simplify the implementation of complex control systems and give designers the flexibility to innovate. ■ CLC (Confi gurable Logic Cell): Integrated combinational/sequential logic and interconnection/re-routing of digital peripherals ■ COG (Complementary Output Generator): An extremely confi gurable waveform generator with programmable rising and falling edge events, precision dead band (5 ns), polarity, auto shut-down and phase control. ■ CWG (Complementary Waveform Generator): Automated complementary output with control of key parameters such as dead-band and auto-shutdown states. ■ NCO (Numerically Controlled Oscillator): Precision linear frequency generator with fi ne step resolution: < 1 Hz up to 500 KHz. Can also be used as a general purpose 20-bit timer/counter. ■ PSMC (Programmable Switch Mode Controller): 16-bit PWM with dedicated 64 MHz clock source and event triggering. Features automated complementary output with control of key parameters such as phase, deadband, blanking and auto shut-down states. ■ 16-bit PWM: High resolution 16-bit PWM with edge and center aligned modes for reduced EMI. Can also be used as a general purpose 16-bit timer/counter. ■ SMT (Signal Measurement Timer): 24-bit precision timer module providing accurate measurement of any digital signal including period, pulse width, frequency, duration and duty cycle. Can also be used as custom digital protocol decoder. ■ HLT (Hardware Limit Timer): Hardware monitoring timer for missed periodic events and fault detection. Can also be used as a general purpose 8-bit timer/counter with external reset capabilities. Featured Core Independent Peripherals Product Families Superset Device Pins Flash/RAM Family Range Analog (Max) Timers/PWM (Max) Comms (Max) Core Independent Peripherals (Max) Additional Features PIC10F322 6 448–896B 64B 8-bit ADC (3) 8-bit (2), PWM (2) – CLC (1), CWG, NCO – PIC12F1572 8 1.75–3.5 KB 128–256 KB Comp, 10-bit ADC (4), 5-bit DAC (1) 8-bit (2), 16-bit (4), PWM (3) EUSART (1) CWG, 16-bit PWM (3) – PIC16F1613 8–14 3.5 KB 256B Comp (2), 10-bit ADC (8), ZCD 8-bit (4), 16-bit (1), PWM (2) USB CWG, SMT (2), HLT (3) CRC/Scan, WWDT PIC16F1509 8–14 1.75–14 KB 64–512B Comp (2), 10-bit ADC (12), 5-bit DAC (1) 8-bit (2), 16-bit (1), PWM (4) EUSART (1), SPI/I2C™ (1) CLC (1), CWG, NCO – PIC16F1709 14–20 7–14 KB 256–1 KB Comp (2), Op amp (2), 10-bit ADC (12), ZCD 8-bit (4), 16-bit (1), PWM (4) EUSART (1), SPI/I2C (1) CLC (3), COG Peripheral Pin Select PIC16F1719 28–40 7–28 KB 512–2KB Comp (2), Op amp (2), 10-bit ADC (28), ZCD 8-bit (4), 16-bit (1), PWM (4) EUSART (1), SPI/I2C (1) CLC (4), COG, NCO Peripheral Pin Select PIC16F1789 28–40 3.5–28 KB 256–2 KB Comp (4), Op amp (2), 10-bit ADC (14), 8-bit DAC (4) 8-bit (4), 16-bit (1), PWM (7) EUSART (1), SPI/I2C (1) PSMC (4) EEPROM 4 8-bit PIC® Microcontroller Solutions Development Tools PICkit™ Low Pin Count Development Board (DM164130-9) ■ Development board for 8, 14, 20-pin 8-bit PIC MCU ■ Populated with PIC16F1829-I/P and ships with PIC18F14K22-I/P (20-pin) MCU ■ This board package contains assembled board with area for prototyping circuits and bare board as well ■ Software can be rewritten to accommodate new technologies PIC10F32X Development Board (AC103011) ■ Populated with the PIC10F322 6-pin MCU ■ Factory programmed with CWG, NCO and CLC demo software ■ Prototype area for development purposes ■ User’s guide and source code available www.microchip.com/cip


EETE MAY 2015
To see the actual publication please follow the link above