Page 70

EETE NOVEMBER 2012

electronica 2012 Company Profile accidental connection and power-on. For cabling inside the device, the new IEC inlet filters are available with proven fast-on tabs or spring cage terminals for faster and vibration-proof wiring. The new flange mount system with either horizontal or vertical Power cord with locking system mounting holes provides maximum flexibility for front or back for IEC inlets with the deep-drawn steel housings an optimal shielding evenmounting. Because of the RF tight joining of the flange frames against strong magnetic fields has been achieved. The FN9280 The SCHAFFNER Group has extended its product portfolio series is equipped with proven single-stage EMC/EMI filters. of IEC inlet filters to include the power cord range IL13 with The FN9290 series requiring the identical panel cutout has a integrated locking system. double-stage EMC/EMI filter with an attenuation of up to 80dB Using an easy-to-operate locking button, the IEC Lock snaps and is ideally suited for applications with higher interference into the IEC mains socket and levels. The B versions of both series with a minimal leakage can be easily unlocked current of 5uA max. are suited for use in medical devices and by employing slight he safety standard IEC/EN60601-1. The FN9280 series can pressure to the optionally be delivered as E version with earth line choke for operating button. additional asymmetric interference suppression. This eliminates the The new series are designed for currents from 1 to 10A with a effort to mount retaining clips to rated voltage up to 250Vac. They are approved for worldwide avoid accidental disconnection of use according to UL, CSA, ENEC and CQC and conform to the power cord. RoHS and REACH. The reliability of electronic devices that are exposed to vibration like in mobile applications can thus be increased. The IL13 New IEC Power Entry Modules is also suitable for use with all equipment requiring secure mains connections, i.e. in the fields of IT, medical, laboratory or with 2-pole Power Switch communications technology. The power cord with the patented IEC Lock system does The new FN 9264 IEC Power Entry Modules extend market not require any modifications to existing IEC sockets. It can leader Schaffner’s wide-ranging product line with a 2-pole be used with any Schaffner IEC inlet filter or IEC C14 inlet power switch version. They are mechanically compatible with according to IEC 60320 up to 10A. the proven FN 9263 series with 1-pole power switch and are The cord is supplied in black with a length of 2m as appealing due to very good damping characteristics and an standard. The red marking of the locking button sets the IL13 outstanding performance/size ratio. unmistakably apart from conventional power cords. FN 9264 filter modules with their standard On the line side the cord can be supplied with different plugs IEC C14 inlet combine the function for international use. Of course the IL13 complies with RoHS of the proven Schaffner EMC/ and REACH requirements and is available everywhere ex-stock EMI filter with a 2-pole rocker via the worldwide Schaffner distribution and sales network. switch in a compact, fully shielded steel housing. New flexible IEC inlet filter series it easy to connect the cableFaston connectors make FN9280 and FN9290 to the device. Thanks to the optimized metal surface the The Schaffner Group has expanded its product range by filter modules ensure optimum the single-stage FN9280 and double-stage FN9290 IEC inlet interference suppression even with narrow space to magnetic filters. The new EMC/EMI filter modules with type C14 IEC components or cables inside the device. appliance inlet set the benchmark due to their ultra-compact EMC/EMI filters of the FN9264 series are designed for a design, patented combined maximum permanent operating voltage of 250 VAC and are switch and fuse holder available as flange mount version with rated currents from 1A to unit, the versatile 10A. flange mount Naturally, these filters have been reviewed by UL, CSA, ENEC system for fast and and CQC for worldwide application. They are RoHS and flexible installation REACH compliant and fulfill the IEC/EN60601-1 requirements and are either for medical applications with the low leakage version (B type). deliverable with fast-on or spring cage terminals. Schaffner Group Despite the compact design of the filter with a height of only 4542 Luterbach, Switzerland 46mm, the combined unit with dual fuse T +41 32 681 66 26 holder provides extra space for a spare fuse. The dual pole F +41 32 681 66 41 power switch disconnects all poles of the device from the www.schaffner.com mains and can be removed for maintenance thanks to the Hall B2 - Booth 612 integration into the combined unit in order to specifically avoid 8 electronica 2012 Show Guide www.electronics-eetimes.com


EETE NOVEMBER 2012
To see the actual publication please follow the link above